Ss-cycle Coated Head Gaskets for S&S Style Engine Kits Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour les motocyclettes Ss-cycle Coated Head Gaskets for S&S Style Engine Kits. S&S Cycle Coated Head Gaskets for S&S Style Engine Kits User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 1
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
S&SS&S
S&SS&S
S&S
®
Cycle, Inc. Cycle, Inc.
Cycle, Inc. Cycle, Inc.
Cycle, Inc.
14025 County Hwy. G
P.O. Box 215
Viola, Wis. 54664
Phone: 608-627-1497
Fax: 608-627-1488
Service Bulletin No. 16
Coated Head Gaskets
for S&S Style Engine Kits
Service Bulletin No. 16
8-15-97
Copyright ©, 1997
by S&S Cycle, Inc.
All rights reserved.
Printed in the U.S.A.
To improve compression sealing and reduce oil seepage, S&S is currently
supplying specially coated head gaskets for many V
2
Style applications.
These gaskets are easily identified by the rubbery coating and factory
applied silicone beads found on both sides of the gasket. Also, the oil
drain openings are approximately 0.560” in diameter, compared to the
0.700” openings in other V
2
head gaskets.
The drain dowel o-rings required with other V
2
head gaskets are
not
used with the new gaskets. Additionally, these gaskets are not compatible
with the flanged cylinder alignment dowels, Part No. 93-1000, provided
with some S&S engines and kits. Flanged dowels must be replaced with
stock type flangeless dowels, Part No. 50-8023, for proper function of
the new gaskets.
NOTE - Failure to follow these instructions will result in damage to gasket
with possible oil or compression loss.
CAUTION - Head gasket failure can cause engine damage not
covered under manufacturers warranty.
With the exceptions noted above, installation of the new gaskets is the
same as for other V
2
head gaskets. Torque head bolts according to
crankcase manufacturers instructions.
CAUTION - Improper installation of head bolts can cause gasket
failure. Excessive torque values can cause studs to pull out of
crankcase.
Vue de la page 0
1

Résumé du contenu

Page 1 - Service Bulletin No. 16

S&SS&SS&SS&SS&S® Cycle, Inc. Cycle, Inc. Cycle, Inc. Cycle, Inc. Cycle, Inc.14025 County Hwy. GP.O. Box 215Viola, Wis. 54664Phone:

Commentaires sur ces manuels

Pas de commentaire